Pedalboard Cable Loom 3 Jacks plus 2 DC - 6 Metres

£10.20








This cable loom is designed for guitar effects pedalboards where the pedals are split into 2 banks:

1) feeding the amplifier guitar input  and  2) feeding the amplifier effects loop.

Additionally  the pedal power supplies for the pedals can be located away from the pedalboard, alongside the amplifier. Together this removes the need for a trailing mains cable and multiple instrument leads.
 

The diagram above shows a typical setup

Several famous guitarists split their effects - a popular choice being to place the delays separately in the guitar amp's effects loop. See Joe Satriani's setup circa 2000 at Guitargeek.


The 6 metre loom length is suitable for small to large stages. The loom is constructed using OFC (Oxygen Free Copper) conductors. The leads are contained within a tough black fexible outer sheath and comprise:-
  1. DC inline power socket for pedals power supply 1
  2. DC inline power socket for pedals power supply 2 (if needed/used)
  3. Mono 6.35mm inline jack socket for sending 1st pedal bank's output to guitar amp input socket
  4. Mono 6.35mm inline jack socket for amp effects send [typically the preamp output] from amp to pedal bank 2 input
  5. Mono 6.35mm inline jack socket for sending 2nd pedal bank's output to guitar amp effects return socket [typically the power amp input]
Each lead is colour coded at each end.


Add to Cart:
Max: 10
  • Shipping Weight: 1.2kg
  • 87 Units in Stock

Solution Graphics
Your IP Address is: 38.107.191.99
Copyright © 2010 Johnny Shredfreak.